|
 |
Hard drive profile
 |
|||||||
| Date added: | 2020-04-02 | Posted by: | shagster | ||||
| Brand: | Western Digital | Firmware: | 12.01D04 | ||||
| Model number: | WD20EARS | Manufacture date: | 2011-9-17 | ||||
| Model name / serie: | Caviar Green | Buffersize: | 64 MB | ||||
| Drive size: | 2000 GB | RPM: | N/A | ||||
| PS2 version: | v7 | Progam(s): | ulaunch 4.43a | ||||
| Adaptor model: | Ethernet Only | ||||||
| Additional notes: | Report this entry - Edit | ||||||
| Modded an original $ony adapter. Be careful not to damage the white ribbon cable, like i did, modifying it. Used an 88sa8040 based adapter, similar to the star tech red branded slim ones. Used master jumper on the adapter. Didn't use any jumper on the drive. Ribbon cable is only 30mm long and under alot of tension. I'm getting a longer 50mm one from aliexpress to replace it! And would suggest doing the same. It's 50 pin 0.5 pitch 50mm type A. |
|||||||