 |
|
Hard drive profile
 |
| Date added: |
2004-07-15 |
Posted by: |
|
| Brand: |
Western Digital |
Firmware: |
N/A |
| Model number: |
WD200 |
Manufacture date: |
N/A |
| Model name / serie: |
N/A |
Buffersize: |
2 MB |
| Drive size: |
20 GB |
RPM: |
7200 |
| PS2 version: |
v9 |
Progam(s): |
HDLoader |
| Adaptor model: |
Ethernet and Modem |
|
|
|
| Additional notes: |
|
Report this entry - Edit |
| the HDD didn't fit at first but you can make it fit... how? take the 6 screws out 1st with a PHILLIPS screw driver... then use a T6 Torx screw driver (found at OSH for $3) to take out the screws on the POWER connector... no need to take out the one's on the IDE connector and it should fit... boot it with HDLoaderLite and it formatted... |
Comments
| #1 - posted by
(87.78.20*.*) | 2006-06-25 16:27:20 |
| dsfsdfsd |
| #2 - posted by add (88.176.15*.*) | 2010-02-27 15:59:33 |
| dfgdf |
| #3 - posted by franci06 (94.36.13*.*) | 2020-09-15 21:46:41 |
| If the hdd won't work but spins up, use the CS (Cable Selector) Jumper |
|
